The Ford Barn - View Single Post

briphaeton · 05-25-2020, 07:45 PM

You make your own cutter out of some 1/4 high speed steel stock. Most machine tool shop sell. It will need to be shaped using a grinder to match the groove needed.

05-25-2020, 07:45 PM	#3
briphaeton Senior Member Join Date: Jan 2012 Posts: 241	Re: KR Wilson Groover You make your own cutter out of some 1/4 high speed steel stock. Most machine tool shop sell. It will need to be shaped using a grinder to match the groove needed.