The Ford Barn - View Single Post

wadsjc · 10-12-2011, 01:53 PM

Some additional information. The temp gage was working OK. I swapped out the starter relay, started the truck and noticed that the temp gage stayed on H - no movement. The coolant is ok and not overheated. The gage just seems to have stopped working. Swapping the two connections to the Dual contact sender doesn't change anything.

10-12-2011, 01:53 PM	#2
wadsjc Junior Member Join Date: Sep 2011 Posts: 18	Re: 1951 Ford F1 Temperature sender Some additional information. The temp gage was working OK. I swapped out the starter relay, started the truck and noticed that the temp gage stayed on H - no movement. The coolant is ok and not overheated. The gage just seems to have stopped working. Swapping the two connections to the Dual contact sender doesn't change anything.