The Ford Barn - View Single Post

Superhart · 10-23-2020, 02:57 PM

I need to remove the window regulator on the driver side of my 1930 Coupe with three screw mounting. The window glass drops an inch or so when rolled up completely. Seems like the regulator may need new springs. Otherwise it raises and lowers properly. I already have the trim panel removed but not sure how to disengage the regulator from the window lift channel. Never did this before so looking to you guys who have done this removal to help me avoid costly mistakes. If anyone can either describe the removal process or point me to an article or video describing how to do the deed would be greatly appreciated. Thanks in advance.

10-23-2020, 02:57 PM	#1
Superhart Senior Member Join Date: Nov 2019 Location: Hilton head, South Carolina Posts: 118	Need Help: '30 Coupe Window Regulator I need to remove the window regulator on the driver side of my 1930 Coupe with three screw mounting. The window glass drops an inch or so when rolled up completely. Seems like the regulator may need new springs. Otherwise it raises and lowers properly. I already have the trim panel removed but not sure how to disengage the regulator from the window lift channel. Never did this before so looking to you guys who have done this removal to help me avoid costly mistakes. If anyone can either describe the removal process or point me to an article or video describing how to do the deed would be greatly appreciated. Thanks in advance.