[sven_andretti]

Thanks for the reply Ernie. I can't take all the credit for everything I've tried, I've been working with my Model A buddies and research this forum. A lot that I tried did come from Ford Barn.

I will give your suggestions a try. Your suggestions got me thinking too. This pickup has an aftermarket ignition switch that sticks out an inch or so from the instrument panel and some had covered where the wires attach with electrical tape. I've run it with the instrument panel hanging loose on the speedo cable and still had the same symptoms. But that doesn't mean it may be time to lift the leads and hot wire it and see what happens. Thanks again!