Quote:
Originally Posted by CA Victoria
I want to add a phenolic spacer to cool the carburetor fuel on a Stromberg 48. I also need to install a vacuum port for a Columbia OD.
Has anyone found a phenolic spacer with a vacuum port?
What thickness phenolic spacer is adequate to reduce the carb heat issue.
|
If you go to ebay and type in the search field "
holley 94 spacer" or "
stromberg 48 spacer" a list of phenolic and aluminum spacers will pop up and several are drilled to accept a fitting for a vacum port.
Here is one example;
https://www.ebay.com/itm/For-Strombe...AAAOxydB1Si8re