Quote:
Originally Posted by Bruce Lancaster
Removal...a long screwdriver stuck into the hole at end of axle housing diagonally will usually snag the deceased seal and allow you to tap it out.
Reinstalling once you have a suitable tool is easier than it might look as the recess for the seal guides it into place. Seal is leather or rubber lip in a steel shell.
|
Bruce, That is what I had in plan but I was not sure if the shell was steel. I didn't want to start on it until I had a better idea what I was dealing with. Just finished up lunch and headed for the shop now. Will report back with my results.
Thanks for your help.