Re: 29 Tudor crank pulley question
Quote:
Originally Posted by fred93
************************************************** ***
Thanks for your reply.
I guess the repro devil strikes again! (repro parts almost fit!!)
The socket size is 1-3/8" --I found it in Snyder's catalog. See photo.
|
They're not all 1-3/8", the one on my '31 CCPU is 1-1/4" and I've heard of 1-5/16" ones.
__________________
If you don't hear a rumor by 10 AM, start one!.
Got my education out behind the barn!
|