The Ford Barn - View Single Post

Big hammer · 06-27-2020, 08:17 PM

The nut can be tighten or loosened with a socket and extension, put the socket over the nut and then an extension through the hole where the hand crank goes. Socket size is 1 1/16 I think maybe 1 1/8 ? I changed my pulley a year ago memory has faded

06-27-2020, 08:17 PM	#5
Big hammer Senior Member Join Date: Jun 2014 Location: Land of Lincoln Posts: 3,131	Re: 29 Tudor crank pulley question The nut can be tighten or loosened with a socket and extension, put the socket over the nut and then an extension through the hole where the hand crank goes. Socket size is 1 1/16 I think maybe 1 1/8 ? I changed my pulley a year ago memory has faded __________________ Don't force it with a little hammer tap, tap, tap get a bigger hammer tap done