some work i am doing on a 30 roadster
heres the start! dug inot the driver side cowl today
found a mix of cement and some red oxide filler of sorts
cut out the mess and found a solid area to work with
welded up the inner piece and seam sealed it up
i made the body line on the harbor freight bead roller with the step die and some work to give it crown . way easier to make your own in my opinion then mess with patch panels
finished up
this crack is really throwing the alignment of the door off on the bottom. its on the top rail you could say on the quarter panel
crack open
craack closed.makes the door fit waaaay tighter to the body
ground a bunch more useless red oxide out of the door now its loking like a nice solid start!