A little bit more each week, now it seems. The seat work was done several months ago. The sides of the top panels were rolled by using a rubber go kart tire in the wheeling machine. The upper and lower frames for the seats are from '30-'31 Model a Tudor seats. The narrow slots in the upper panels are slots that I had the water jet guy make in the panels so the panels would hold their shape from end to end while rolling. When they are fitted and held in place, I will cut that area out so that the wire edgings can be installed.
The 3" thick seat cushion foam was cut an a water jet machine.
June2815 006.jpg
June2815 005.jpg
June2815 004.jpg
Fixtures 016.jpg
Fixtures 011.jpg
Fixtures 012.jpg
Fixtures 014.jpg