The Ford Barn - View Single Post

George Miller · 10-17-2015, 07:33 AM

Thanks for the good words. How many hours. I did not keep up with the hours, but I have about 30 hours in the rods. But with a CNC mill it would be much faster. I did it the way we would have done it 40 years ago.

The engine is just some thing I wanted to do. I think it will work well with my home built cylinder head. But it will be different. Like Tom says it will sound like two two cylinder John Deere's running. They were odd fire also.

10-17-2015, 07:33 AM	#64
George Miller Senior Member Join Date: May 2010 Location: NC Posts: 2,975	Re: 5 main, chev, crankModel A engine Thanks for the good words. How many hours. I did not keep up with the hours, but I have about 30 hours in the rods. But with a CNC mill it would be much faster. I did it the way we would have done it 40 years ago. The engine is just some thing I wanted to do. I think it will work well with my home built cylinder head. But it will be different. Like Tom says it will sound like two two cylinder John Deere's running. They were odd fire also. Last edited by George Miller; 10-17-2015 at 09:08 AM.