View Single Post
Old 09-12-2020, 04:03 PM   #6
Ronnieroadster
Senior Member
 
Ronnieroadster's Avatar
 
Join Date: Dec 2010
Location: East Coast in CT
Posts: 1,529
Default Re: Help with "Full Race" cam ID

Sponsored Links (Register now to hide all advertisements)
The number 385 I would expect that is the lift dimension. Not really a full race cam if its only 385 lift. To be sure of the lift dimension measure the heal diameter and then the height of the lobe. Next subtract the heal measurement from the lobe height thats the lift of the cam.
Ronnieroadster
__________________
I use the F word a lot no not that word these words Flathead , Focus and Finish.
"Life Member of the Bonneville 200 MPH Club using a Ford Flathead block"
Owner , Builder, Driver of the First Ford Flathead bodied roadster to run 200 MPH Record July 13, 2018 LTA timing association 200.921 in one and a half miles burning gasoline.
First ever gas burning Ford flathead powered roadster to run 200 MPH at Bonneville Salt Flats setting the record August 7th 2021 at 205.744 MPH
Ronnieroadster is offline   Reply With Quote