[BRENT in 10-uh-C]

Originally Posted by Bob Bidonde

As an experiment for a comfort heat source, I am installing 12V heated seat covers, one in the back seat and one on the front seat. If this works, I will install two more heated seat covers.
The covers are Sojoy Item SJ115R054, and they are equipped with a controller containing ON-OFF, High, Medium & Low heat, power indicator LED, a fuse and a power connector. Current draw is 2.6A and Max Power is 45W. My Model "A" has a 12V 60A Alternator.
Has anyone out there done this? If so, please share your experiences.

Bob, here is some additional comments on this topic;

https://www.fordbarn.com/forum/showthread.php?t=262147

.
.