The Ford Barn - View Single Post

Tinbasher · 09-11-2017, 09:44 PM

The offset die has a joggel in it. The two rollers fit together and you end up with a drop so you can mate another panel to it with a lap weld. My bead roller came from Eastwood and uses 2" dies.
Hope this helps.

John

09-11-2017, 09:44 PM	#10
Tinbasher Senior Member Join Date: May 2010 Location: Innisfil, Ontario Canada Posts: 1,174	Re: Bead Roller help The offset die has a joggel in it. The two rollers fit together and you end up with a drop so you can mate another panel to it with a lap weld. My bead roller came from Eastwood and uses 2" dies. Hope this helps. John