View Single Post
Old 07-12-2020, 07:05 PM   #10
JM 35 Sedan
Senior Member
 
JM 35 Sedan's Avatar
 
Join Date: May 2010
Location: Near Rising Sun, Maryland
Posts: 10,858
Default Re: supplier of 1933-34 Ford Windshield Rubber

Who installed the rubber gasket that tore apart?

My first couple attempts at installing these rubber windshield gaskets did not go well. The first one I tried, I definitely DID NOT have all the old rubber from the previous gasket completely cleaned out of the groove in frame. Then I was NOT using the best tool I could have chosen to push the rubber into the groove. Then I chose the wrong lube to use trying to make the rubber go in place, then finally I determined that I was not putting the right part of the gasket into the channel first. After much frustration, and ruining one gasket I nailed the proper installation procedure and everything worked and went together perfectly.
Unfortunately, I suspect that most folks complaining of having problems, and blaming the manufacturer's product, are actually experiencing user error.
__________________
John

"Never give up on what you really want to do. The person with big dreams is more powerful than one with all the facts". Albert Einstein

Last edited by JM 35 Sedan; 07-13-2020 at 11:00 AM.
JM 35 Sedan is offline   Reply With Quote