The Ford Barn - View Single Post

abachman3 · 01-21-2018, 02:36 PM

Our local club has been using a approx. 3 foot piece of 2-inch plastic pipe that we put snug between the bumper of the tow vehicle and model A (Sometimes the tow vehicle is a model A). We use a web strap pulled tight between the two vehicles and through the 2 inch pipe... and we do have someone in the model A to steer and aid in braking. We have towed numerous model A's for several miles when necessary. Pretty straight forward solution and no damage to the model A as it cannot hit the tow vehicle because of the three foot standoff.

01-21-2018, 02:36 PM	#34
abachman3 Senior Member Join Date: Jun 2013 Location: Western Springs, IL Posts: 324	Re: towing 29 A Our local club has been using a approx. 3 foot piece of 2-inch plastic pipe that we put snug between the bumper of the tow vehicle and model A (Sometimes the tow vehicle is a model A). We use a web strap pulled tight between the two vehicles and through the 2 inch pipe... and we do have someone in the model A to steer and aid in braking. We have towed numerous model A's for several miles when necessary. Pretty straight forward solution and no damage to the model A as it cannot hit the tow vehicle because of the three foot standoff. Last edited by abachman3; 01-21-2018 at 04:05 PM.