Thread: Wandering
View Single Post
Old 09-06-2020, 07:58 PM   #3
Jim/GA
Senior Member
 
Jim/GA's Avatar
 
Join Date: May 2010
Location: Young Harris, GA
Posts: 1,808
Default Re: Wandering

Mac-
Check your toe-in. Shoot for 1/16" +/-1/32" (Service Bulletins page 282).

Check also for king pin bushing wear. With tire/wheel off the ground (jack under axle) push in and out on the top and bottom of the wheel from the side to see how much wear there is.

Hope this helps.



.
__________________
Jim Cannon
Former MAFCA Technical Director
"Have a Model A day!"
Jim/GA is offline   Reply With Quote