The Ford Barn - View Single Post

DavidG · 08-26-2020, 04:02 PM

The back lip of the rear cross member attached with two short (1 1/8" overall length) spring steel clips (one per side about half way between the center and outer end of the cross member). Originally, the wires from the tail lamps were not long enough to connect to the crossover harness if it were routed in front of the rear cross member.

08-26-2020, 04:02 PM	#2
DavidG Senior Member Join Date: May 2010 Location: southeastern Michigan Posts: 10,101	Re: 34 Tailite wiring The back lip of the rear cross member attached with two short (1 1/8" overall length) spring steel clips (one per side about half way between the center and outer end of the cross member). Originally, the wires from the tail lamps were not long enough to connect to the crossover harness if it were routed in front of the rear cross member.