View Single Post
Old 07-29-2020, 02:41 PM   #8
Jim M
Senior Member
 
Jim M's Avatar
 
Join Date: Nov 2010
Location: Sebastian, FL
Posts: 479
Default Re: Battery Isolator switch

Just tried uploading a couple of pictures but no luck. But the swith attaches to one of the bolts that hold the starter on (the one you actually see when you look at the started.. After you have attached the switch to the starter ( just ONE bolt) you cut the wire that goes from the Negative post of battery to the starter, strip the ends that are cut and attach them to the switch. Half hour job. Then when you put the car to bed for the night just snap the switch off and close the hood.
Jim M is offline   Reply With Quote