[Tom Wesenberg]

I'll just repost this picture from my old computer. Your's has the bushing on the rear, so just look at the left half of this picture and the order of the parts as layed out in the 2 rows, 3 parts on the top row and 4 parts on the bottom row. They are in order, so to reassemble you start with the bearing retainer plate on the bottom right, then work left, then go the the top right and work left again. I never remove the inner split ring by the bearing, as there is no need to.

When you squeeze the front retaining ring back together be sure it's a nice tight circle or it will scrape on the metal plate.