Re: The Old Opportunity Motor
Quote:
Originally Posted by Russ/40
It is established, the "opportunity motor" is a motor NOT. There must be some useful purpose for what is left. Perhaps cut the top 3/4" off and make a torque plate out of it. Or perhaps a plate for pressure testing "A" blocks.
What say you guys and gals. What else can you think of in repurposing what is left.
|
Solder plates over the holes? Or if you have a vintage farm implement you could do like they did in the old days & make a 'shortened' engine to match.
https://www.youtube.com/watch?v=WL1yiIh-IGw
https://www.youtube.com/watch?v=dVWYEvOxdFE
Or a cut away engine
__________________
<Link> This is how we roll<Link>
"I'm Convinced that no one really reads posts anymore; they just fabricate what they think the post says then ramble on about red herrings."--Bob
Outcasts rules of old cars
#1 Fun is imperative, mainstream is overrated
#2 If they think it is impossible, prove them wrong
#3 If the science says it impossible you are not being creative enough.
#4 No shame in recreating something you never had
#5 If it were not for the law & physics you would be unstoppable
Last edited by dumb person; 12-24-2019 at 02:25 AM.
|