Quote:
Originally Posted by 1931 flamingo
Take the back cushion out, look at the bottom frame of the cushion, there should be two "holes". Now look at the bottom of the deck lid, there should be 2 "D" nuts that take two bolts thru the 2 "holes". Install the seat as you usually do and insert the lower bolts and tighten. FWIW This is if I've remembered correctly.
Paul in CT
|
Thanks a million guys, just what you said, bottom of the frame there were 2 tabs hidden behind the frame and upholstery, had to make a small cut in the upholstery to allow them to pivot out, although mine of course didn't have the D nuts, the holes were there and we didn't have the correct size D nut to crimp in them, we took 5/16 bolt and washer come in from the back side and put another washer and nut on to form basically a stud for the seat tabs to be attached to. Works great, thanks for the help.
Quote:
Originally Posted by TMarsh
That is correct, but in can be a PITA. I ended up securing mine with plastic ties around spring and to rumble lid. Works great and you cant see it.
|