The Ford Barn - View Single Post

cas3 · 07-23-2020, 06:35 PM

tig would be best, mig will work. i would bolt it to a hunk of steel as it will move around on ya. use an old iron manifold for a pattern. actually, an early manifold would work perfect, flat on both sides

07-23-2020, 06:35 PM	#2
cas3 Senior Member Join Date: Jan 2011 Location: sw minnesota Posts: 4,577	Re: Best way to fix this header tig would be best, mig will work. i would bolt it to a hunk of steel as it will move around on ya. use an old iron manifold for a pattern. actually, an early manifold would work perfect, flat on both sides