The Ford Barn - View Single Post

katy · 06-15-2020, 10:26 AM

The bearings should be a slip fit as they are supposed to slowly turn when the vehicle is moving. this prevents the bearing from only wearing in one spot (the bottom).

06-15-2020, 10:26 AM	#4
katy Senior Member Join Date: Jun 2015 Location: Red Deer, Alberta Posts: 5,042	Re: New Front Wheel Bearings The bearings should be a slip fit as they are supposed to slowly turn when the vehicle is moving. this prevents the bearing from only wearing in one spot (the bottom). __________________ If you don't hear a rumor by 10 AM, start one!. Got my education out behind the barn!