The Ford Barn - View Single Post

jharrellh · 07-20-2020, 03:03 PM

Curious how long the threaded post should be on a front engine yoke. I suspect mine may have been sheared off and filed, since it seems a little short and has no cotter pin hole. It was mounted with rubber donuts, replacing with the proper spring mount. Thanks!

07-20-2020, 03:03 PM	#1
jharrellh Junior Member Join Date: Aug 2013 Location: Ludlow, KY Posts: 23	Front Engine Mount Post Length Curious how long the threaded post should be on a front engine yoke. I suspect mine may have been sheared off and filed, since it seems a little short and has no cotter pin hole. It was mounted with rubber donuts, replacing with the proper spring mount. Thanks!