Re: Wet sand blasting??
Quote:
Originally Posted by frnkeore
I've warped .093 sheet aluminum, taking epoxy paint off of it, using glass beads.
What happens is that you peen the surface, distorting it, in comparison to the off side. Even if you try to peen the other side, with the beads, it never comes out even, in my experience.
|
Glass bead is not aggressive enough (wrong media) for the removal of epoxy paint.
That, along with excessive air pressure is a recipe for disaster.
__________________
DON'T RECALL DOING SOMETHING FOR MYSELF BASED ON SOMEONE ELSE'S LIKES OR DISLIKES
Last edited by 51 MERC-CT; 07-10-2020 at 06:01 AM.
|