The Ford Barn - View Single Post

Alaska Jim · 12-07-2020, 03:46 PM

make sure to check the bore to make sure it does not need bored. It probably does, but if not you will still have to hone it. you will have to have a machine shop do the bore job and have them fit the new pistons that will be required if you bore it. also have the machine shop check the crank journals.

12-07-2020, 03:46 PM	#8
Alaska Jim Senior Member Join Date: May 2010 Location: Palmer, Alaska Posts: 1,575	Re: Any advice for a newbie? make sure to check the bore to make sure it does not need bored. It probably does, but if not you will still have to hone it. you will have to have a machine shop do the bore job and have them fit the new pistons that will be required if you bore it. also have the machine shop check the crank journals.