The Ford Barn - View Single Post

deuce lover · 03-08-2021, 06:45 AM

Yes Keith.The stepped one is just like the ones I had.One I found in France 30 yrs ago and the others in Calif years later.The one I found in France was missing the crank hole bezel and center bars missing also.The stainless outer was joined and welded behind where the crank hole bezel went.I sanded and polised the joint and installed repo bars(available then) and eliminated the crank hole bezel(which I did not have).

03-08-2021, 06:45 AM	#16
deuce lover Senior Member Join Date: May 2010 Location: Southern France Posts: 5,307	Re: 1932 Grill Shells, Inserts & Crankholes Yes Keith.The stepped one is just like the ones I had.One I found in France 30 yrs ago and the others in Calif years later.The one I found in France was missing the crank hole bezel and center bars missing also.The stainless outer was joined and welded behind where the crank hole bezel went.I sanded and polised the joint and installed repo bars(available then) and eliminated the crank hole bezel(which I did not have).