Re: Oil return line plugged?
[QUOTE=JSeery;1883898]I would bet the return holes are there, they can be hard to see. There is really no reason they would not be there unless it has been modified for some reason, which would be odd. The restrictor on the inlet side can likewise be somewhat difficult to locate. It could in at the fitting coming out of the block or inside a T-type fitting going into the canister. It can probably be in other locations.
Thanks, I'm sure they are there but they are really plugged and hidden. I have applied 100psi on the tube and no leaks so they have been that way a long time. I'd feel a lot better about drilling a relief hole if I knew I had a restrictor on the inlet. I'll have a look at the supply end near the oil pressure sending unit maybe it is there. Thanks again for the reply
Dan
|