The Ford Barn - View Single Post

jw hash · 02-02-2020, 05:45 PM

the original emblem retainer is made to push in one way and it is easier to remove them by using a screw driver and lightly tap around the retainer. it will bend the edge of the retainer and release the emblem. you can straighten out the retainer with a pair of pliers.

02-02-2020, 05:45 PM	#3
jw hash Senior Member Join Date: May 2010 Location: Auburn Washington Posts: 2,552	Re: Radiator emblem the original emblem retainer is made to push in one way and it is easier to remove them by using a screw driver and lightly tap around the retainer. it will bend the edge of the retainer and release the emblem. you can straighten out the retainer with a pair of pliers.