Re: model b intake diagnosis
Check the valves as Dave suggested. Have the intake and exhaust manifolds surfaced while bolted together. Clean up the block and check for flatness as rotorwrench suggested. Minor imperfections can be filled in with JB Weld and sanded level. Use a sandwich copper gasket like https://www.snydersantiqueauto.com/p...4052&cat=41733
__________________
A is for apple, green as the sky.
Step on the gas, for tomorrow I die.
Forget the brakes, they really don't work.
The clutch always sticks, and starts with a jerk.
My car grows red hair, and flies through the air.
Driving's a blast, a blast from the past.
|