The Ford Barn - View Single Post

GB SISSON · 10-24-2021, 12:53 PM

Ok, stepson fixed the private thing too. It always worked on my computer, but now it should work on yours too. Last year I stole the air cleaner off the six to use on my cummins conversion in my 47 tonner pu. Now I stole it back because it seems to be an unusual mounting with a side bolt etc. Does the six carb have the same clamping arrangement as an 8ba carb? I need to find an oil bath for my turbo, but I'm sure the V8 version is much easier to find. Thanks

10-24-2021, 12:53 PM	#48
GB SISSON Senior Member Join Date: Jan 2014 Location: Orcas Island Washington Posts: 4,992	Re: Reviving a proper six Ok, stepson fixed the private thing too. It always worked on my computer, but now it should work on yours too. Last year I stole the air cleaner off the six to use on my cummins conversion in my 47 tonner pu. Now I stole it back because it seems to be an unusual mounting with a side bolt etc. Does the six carb have the same clamping arrangement as an 8ba carb? I need to find an oil bath for my turbo, but I'm sure the V8 version is much easier to find. Thanks __________________ Owner/Operator of 'Jailbar Ranch' on the side of Mt. Pickett. Current stable consists of 1946 1/2 ton pickup turned woodie wagon with FH V8, 1946 Tonner Pickup with 226 H six, 1979 Toyota landcruiser wagon, now wearing 1947 Ford Jailbar sheet metal. 'Rusty ol' floorboards, hot on their feet' (Alan Jackson)