The Ford Barn - View Single Post

mleder · 04-21-2017, 06:34 PM

I compromised and cut around the hubs removing the majority of the drum. Just leave some room around the hub when running the torch. The person I sent them to had no problem with that. Would not hurt to ask the service person first. I saved a bit on the freight and the packaging was much easier .

04-21-2017, 06:34 PM	#14
mleder Senior Member Join Date: May 2010 Posts: 180	Re: Removing 4 Bad Drums from 4 Good Hubs I compromised and cut around the hubs removing the majority of the drum. Just leave some room around the hub when running the torch. The person I sent them to had no problem with that. Would not hurt to ask the service person first. I saved a bit on the freight and the packaging was much easier .