Thread: Spark Question
View Single Post
Old 07-26-2020, 02:08 PM   #25
wmws
BANNED
 
Join Date: Feb 2013
Location: Coatesville, Pa
Posts: 719
Default Re: Spark Question

[QUOTE=txmike;1913244]ok i get power to lower and upper plate - but the problem is it does not appear to be going to the points (Open or closed)



With the points open you should not have power to either plate. With the points closed the juice is going to ground through the stationary point and the upper plate. You possibly have the coil wire screwed too far into the distributor. Only screw it in about three turns.
wmws is offline   Reply With Quote