The Ford Barn - View Single Post

PC/SR · 10-02-2018, 10:29 AM

I use the copper spray on the Best graphite gasket with a 7:1 head. Tighten to 60bls. It does seal well. I get the head off by loosening the head nuts a few turns and turn it over with the ignition off.

10-02-2018, 10:29 AM	#17
PC/SR Senior Member Join Date: May 2010 Location: Santa Rosa, CA Posts: 1,279	Re: Head Gasket for the 6:1 Iron head I use the copper spray on the Best graphite gasket with a 7:1 head. Tighten to 60bls. It does seal well. I get the head off by loosening the head nuts a few turns and turn it over with the ignition off.