The Ford Barn - View Single Post -

J Franklin · 08-23-2019, 03:04 PM

Pinch the cable clamping end tight with the bolt out and run a hacksaw between the 2 sides to allow the clamp to tighten up more. Or replace the cable with one that fits.

08-23-2019, 03:04 PM	#5
J Franklin Senior Member Join Date: May 2010 Location: Oregon Posts: 5,963	Re: - battery post Pinch the cable clamping end tight with the bolt out and run a hacksaw between the 2 sides to allow the clamp to tighten up more. Or replace the cable with one that fits.