Quote:
Originally Posted by grumppyoldman
Thanks for the suggestions, I've replaced the kink pins and used the ones with needle bearings. Some said they don't work too well. The wobble didn't go away, but was better. Just had tires balanced and rotated. Wobble got worse. Guess I'll start over reworking and checking everything again. Al
|
How were the wheels mounted on the balancer---most modern wheels are centered by the hole in the center, modern balancers mount the wheel this way----the old ford wheels are lug centered,the hole in the center may not be the wheel center and should be mounted by the lug holes on the balancer---most balancers have adapters to do this, but it takes much more setup time