The Ford Barn - View Single Post

Great Lakes Greg · 01-31-2018, 02:00 PM

I was trying to salvage a straight 21" wheel with pin holes in the inner rim, but kept blowing holes through it, even with my welder turned way down. I can JB weld it after my powder coat guy is done, but media blasting will likely deposit a lot of material inside that rim. How do you guys fix pin holes and thin metal on these wheels? 21's are not as plentiful as they once were, and I would like to save the ones I find with this issue.

01-31-2018, 02:00 PM	#1
Great Lakes Greg Senior Member Join Date: May 2010 Posts: 1,369	21 inch rim repair I was trying to salvage a straight 21" wheel with pin holes in the inner rim, but kept blowing holes through it, even with my welder turned way down. I can JB weld it after my powder coat guy is done, but media blasting will likely deposit a lot of material inside that rim. How do you guys fix pin holes and thin metal on these wheels? 21's are not as plentiful as they once were, and I would like to save the ones I find with this issue.