Quote:
Originally Posted by ford nut
wow. looks really good with the square corners. i thought about folding over the top edge of the interior side so that it wouldn't get all wavy looking like mine is now. just like 1/2" to keep it stiff. did you paint the inside with something good? i've been having good luck with por-15 to really seal these types of projects, just scuff it real good with some 60 grit for good bite. soon i'll be there too.
|
I used 18 ga; stiffer than the original tin; but a folded over edge would look nice too.
I blasted it and just used Rustoleum red primer; figured it will outlast me and whoever gets it next; unless they maybe park it in a field for 50 some years again.