The Ford Barn - View Single Post

redmodelt · 01-24-2021, 10:52 AM

That is all correct. Make sure the bridge washer runs parallel to the tube not across. The dust cover would screw down and sit on top of the nut, not covering it.

In the future, ask your questions on the Model A forum. This section is for questions about the site or issues with it's use.

Don't forget to install the rim liners.

01-24-2021, 10:52 AM	#2
redmodelt Senior Member Join Date: May 2010 Location: Portland OR Posts: 6,340	Re: Bridge washer proper installation That is all correct. Make sure the bridge washer runs parallel to the tube not across. The dust cover would screw down and sit on top of the nut, not covering it. In the future, ask your questions on the Model A forum. This section is for questions about the site or issues with it's use. Don't forget to install the rim liners. __________________ I know the voices aren't real but damn they have some good ideas!