[TK in LA]

This is an early (June of '28) 5 cam bearing motor that needs complete rebuild. Been sitting a looong time. No visible cracks. A couple of broken studs and rusty cylinder walls. The Babbitt on the one rod cap I did take off was still good but the crank had rust. Has adjustable lifters in unknown condition. No valves, guides or springs. What you see is what is available minus my fixture. The Serial number may or may not be in the system for re-use? First come, first serve. I need it gone. $50.00 or make offer. No habla espanol, No text! No shipping unless you arrange it.