Quote:
Originally Posted by JSeery
Question, where did the gaskets come from? If not a reliable source I would suggest talking to someone like Mac VanPelt or 3rd Generation and getting better parts. I don't think you are going to like it if you have to pull it and redo it later if there is an issue. The steering box gasket have to be specific sizes to set the bearing loads.
|
Yes, trying to avoid doing it all again, not that practice isn't good...
Unfortunately Mac auto parts. I tagged them onto an existing order. They had Denise carpenter logo covered up on the packaging.
The steering box top gasket is thick and appears solid but the multiple smaller gaskets to set bearing load are thin brown paper.
At least my banjo gaskets are made by Best gasket.