Quote:
Originally Posted by 30 Closed Cab PU
LEDs - just a suggestion, may want to contact the LED manf, think I remember everything on the same circuit needs to be LED, can not mix other types on the same circuit. If you are paralleling off the current wiring, everything has to be LED. Again I am not 100% sure, check it out before deciding.
|
Looks like I misunderstood originally, and the creaky grey matter was was not up to snuff. Took awhile found the info on this link. Has to do with miss wiring towards the bottom of this link
And this site has a lot info if you are bored.
http://www.dynamoregulatorconversion...tting-leds.php