View Single Post
Old 09-14-2020, 06:26 PM   #7
mrtexas
Senior Member
 
mrtexas's Avatar
 
Join Date: May 2010
Location: Sugar Land, TX
Posts: 4,395
Default Re: 1936 lift points for 2 post lift

Quote:
Originally Posted by dave collette View Post
Hi I lift these old fords two or three times every day with absolutely no problems. Been doing it for over twenty years. these cars have a strong frame. Had my 1935 roadster up on it today. I think you are worrying about nothing
IMHO I was surprised with how light and flimsy the frame on my 36 wagon was when I took it off for paint.

I did however make 4-6 inch tall extensions for the arms to get them up high enough to clear the body when lifted. Other problem was 2 post needed to have posts closer in for flatheads and farther out for modern cars.

I got rid of my 2 post lift after I got tired of bending down to place the arms.

If I had to do it again I'd put a 2 x 12 across each arm pair front and back bolted to the hand on the arm to spread out load on the frame

Have 2 bendpak 4 post lifts and one bendpak parking lift. Used to have maxjax 2 post
__________________
41 woodie https://41fordwoodie.weebly.com/
mrtexas is offline   Reply With Quote