Re: Model A cracked block
From reading your first post, I’m guessing you’ve never driven this engine? I’m looking at the valves, and they are completely flat on the block, which means they’re wore out. You should push the crank front and back and see how much play is in the crank. Also look at how many shims are left in your bearings if any. I’m thinking that this block is just wore out. You could probably seal that hole and use it for an ice cream getter, if that’s all you’re going to do, but if you want to car that you can drive somewhere, You’re going to have to get a better engine or rebuild an engine. It isn’t cheap
|