Quote:
Originally Posted by Fwilkinson
……………….The fuel level is supposed to be set at 7/8” below the seam on the lower half of carburetor...……………….I think some people adjust to the fuel level even lower.
Fred
|
FWIW
I have two books for rebuilding Zenith Carburetors, one by Paul Moller and one by Steve Pargeter.
The Paul Moller book sets the float level 5/8 inch from the machined surface of the upper body.
The Steve Pargeter sets the float level 5/8 inch from the upper machined surface of the lower body.