Re: T5 trany in 55 wagon
Thank you much Coop! Your advice is greatly appreciated. First to admit, this is my first dealings with a T5 instal, although I did instal a TKO-600 in my 55 3100 a few years back. My delivery came with a 11" flywheel, clutch and pressure plate and the trany. I did research it as a Mustang V8 with the 7 1/8" input shaft. I bought the adapter from MDL who confirmed it was the correct one. Probably should have mentioned it before, but thought I was past that. Waiting on a new starter ring gear, yoke and U-joints. Hoping next week it can go together, bring the driveshaft to my local machinist and focus on the shifter and cross member. Will share my progress
|