The Ford Barn - View Single Post

1937sedandelivery · 03-20-2018, 11:19 PM

Very good input. When I pressed out the old bushings, I got them out, but could have tweaked the top and bottom raceways. Impossible to tell. And yes, I may be able to hone the top and bottom bushings, but it will be independent processes. Am convinced to go to a good machine shop or rebuilder and have the bushings honed all at once. Thanks for saving me some headaches!
gregg

03-20-2018, 11:19 PM	#12
1937sedandelivery Senior Member Join Date: Jul 2014 Location: Tucson, AZ Posts: 332	Re: 37 front spindle/king pin assembly Very good input. When I pressed out the old bushings, I got them out, but could have tweaked the top and bottom raceways. Impossible to tell. And yes, I may be able to hone the top and bottom bushings, but it will be independent processes. Am convinced to go to a good machine shop or rebuilder and have the bushings honed all at once. Thanks for saving me some headaches! gregg