Quote:
Originally Posted by A31Woody
UPDATE on my search for the 15-20mph noise. Popped off the drivers front hub last night and one of the rollers on the inner (larger) bearing was broken. Hoping it's going to be as simple as replacing the bearings and races in that hub.
|
Well, it depends on whether you 'caught' it soon enough! If you did, then it should be an easy swap for new. However, I'd be concerned as to ...WHY it happened, i.e.- cheap defective replacement part; not lubed proberly; not adjusted properly..WORN HUB, etc. I'd make sure that I checked the other side also. Q: how was the adjustment situation...when you took the BO side off? Too tight/too loose adjustment is bad business,eh! No regular PM is asking for it