The Ford Barn - View Single Post

mjdunn · 04-09-2018, 07:43 AM

I have a 39 Ford with the original 6 volt set up. I have 6 volts going to the resister and 1.8 coming out of the resister and 1.5 at the coil with the ignition on and the motor not running. Shouldn't I have 3.5 at the coil?

04-09-2018, 07:43 AM	#1
mjdunn Senior Member Join Date: May 2013 Location: Dry Ridge, KY Posts: 107	Voltage to coil on 39 Ford I have a 39 Ford with the original 6 volt set up. I have 6 volts going to the resister and 1.8 coming out of the resister and 1.5 at the coil with the ignition on and the motor not running. Shouldn't I have 3.5 at the coil?